Pest control companies apply Bora-Care® with
Mold-Care® to
New Construction
When your home is being built, all wood is accessible. This is the perfect
time to do a whole house Bora-Care with Mold-Care treatment. This whole house
treatment protects all wood from mold, decay fungi, termites, carpenter ants and
wood boring beetles, and even discourages general pests such as cockroaches.
Bora-Care with Mold-Care diffuses into the wood and remains in the wood,
delivering residual power for years of protection. Just ask your builder or pest
control company for a whole house treatment using Bora-Care with Mold-Care for
your home.
Water Damaged Materials
If your home has been damaged by water from leaking pipes, rain or flood
waters, have your pest control company apply Bora-Care with Mold-Care to all
affected structural wood. Wood decay and mold can begin to grow almost
immediately. By applying Mold-Care, you kill existing mold and stop wood decay
in its tracks. You are also protecting the wood in case of future flooding.
Mold-Care is the industry’s leading
weapon against mold. It acts as a surface protectant, killing all forms of fungi
(including mold), while sanitizing and disinfecting the treated area. Bora-Care
is the industry’s leading borate-based wood preservative, rendering treated wood
impervious to termites and other wood destroying insects, as well as wood decay
fungi. It actually penetrates into the wood where it delivers residual
protection for years. When used together, Bora-Care and Bora-Care with Mold-Care
create a highly effective, residual solution to insects and mold.
Apply to whole house or high-risk areas
A Bora-Care with Mold-Care treatment is a one-time
preventative application that can be completed either during the new
construction phase or applied post-construction in high-risk areas such as
kitchens, bathrooms and crawl spaces.
Provides residual protection
Bora-Care with Mold-Care diffuses into wood and remains there for as long as
the wood is in service, providing years of residual protection.
Creates a buffer zone
In an untreated home, flood or water damage can cause mold to grow within a
week. The mold can be as devastating as the flood itself. Even in catastrophic
conditions, Bora-Care with Mold-Care will act as a retardant to mold growth,
giving you more time to recover. It also disinfects and sanitizes, critical
necessities in a water-damage situation.
Inhibits the growth of mold
Specifically designed to work with Bora-Care, Mold Care prevents the
establishment of dry rot, wet rot and mold. Bora-Care adds additional residual
protection against decay fungi and insect infestation. Bora-Care with Mold-Care
can be applied to bare wood, plywood, particleboard, drywall and OSB. And it’s
the best approach you can take against mold. Bora-Care with Mold-Care is
designed to penetrate wood; it doesn’t just remain on the surface, but is
absorbed into the interior of wood to protect it from the inside out.
I.
MIXING INSTRUCTIONS
Bora-Care
® is a
concentrate that must be
diluted with clean water before use. The use of warm or hot water, if
available,and an impeller-type mixer that can be used with an electric drill
aids the dilution process.
For mold control, mix 1 pint of
Mold-CareTM Moldicide Concentrate with 1 gallon of Bora-Care® in 5 gallons of water following the procedures
below:
A.
Hand Sprayers: Mix in a clean container and stir the solution until completely uniform.
Always mix in a separate container then add the solution to a spray tank. Mixing
Bora-Care®
solutions
directly in a spray tank can block hoses and nozzles.
B.
Hand Volume Pumping Systems: Add all of the dilution water to tank, start
recirculator, then slowly add Bora-Care® and Mold-CareTM
Moldicide
Concentrate concentrates. Mix until uniform.
The solution will remain stable for up to 30 days. Do not leave
unused solution under pressure or in tank overnight.
Clean and/or flush equipment and lines with water after use.
II.
GENERAL INFORMATION
Bora-Care
® is an
innovative termiticide, insecticide and fungicide that provides long term
protection against: Brown Rot (including dry rot), White Rot, Wood Decay, Molds
and Other Fungi
<
List Price:
$165.00
Order online and save 5%:
$156.75
individually or save by purchasing 2 for $300.00
Your shipping destination zone will automatically be determined during the checkout
process. If you would like to view the rates for your zone, you can manually select
your zone from the list below.
DC, DE, NH, RI, VT
METHOD
ESTIMATED DELIVERY TIME1
SHIPMENT CHARGE2
CHARGE PER UNIT
FED EX GROUND
1-5 DAYS
$10.75
$5.60
FED EX 3 DAY
3 DAYS
$14.50
$17.50
FED EX 2 DAY
2 DAYS
$16.50
$23.10
FED EX OVERNIGHT
BY 10:30 AM NEXT DAY
$38.00
$40.60
UPS GROUND
1-5 DAYS
$10.65
$4.90
UPS 3 DAY
3 DAYS
$14.00
$15.40
UPS 2 DAY
2 DAYS
$15.50
$19.60
UPS NEXT DAY AIR
BY 10:30 AM NEXT DAY
$38.00
$40.60
PRIORITY MAIL
2-6 DAYS
$10.80
$12.60
1ACTUAL DELIVERY TIMES MAY VARY. 2YOUR TOTAL CHARGE WILL BE THE MAXIMUM SHIPMENT CHARGE + (QUANTITY ORDERED X CHARGE PER UNIT). YOUR TOTAL SHIPPING COSTS WILL BE SUMMARIZED DURING CHECKOUT.
Prices are subject to change. All shipments will be billed at the price in effect at the time the order is received and processed at U-Spray, Inc.. U-Spray, Inc. is not responsible for typographical errors. Possession of pricing offered from this web site is not to be construed as an offer on the part of U-Spray, Inc. to sell the products listed at the prices shown. Prices shown do not include shipping or handling which we will add to the shopping cart total when we finalize the processing of your order. CLICK HERE TO GO BACK ONE PAGE
Welcome!
A Bora-Care with Mold-Care treatment is a one-time
preventative application that can be completed either during the new
construction phase or applied post-construction in high-risk areas such as
kitchens, bathrooms and crawl spaces. 
